Filler injection training using the MD Codes method

Training in Filler Injection Using the MD Codes™ Method

Filler injection using the MD Codes™ method is one of the most advanced approaches for facial rejuvenation and improving facial appearance. It was developed by Dr. Mauricio de Maio, a Brazilian plastic surgeon. This method is based on a specific coding system that precisely identifies different facial areas so that fillers can be injected in a more targeted and effective way. Below, I will explain the main stages of training in filler injection using the MD Codes™ approach:

1. Understanding Facial Structure

• Identifying different facial areas:
  The face is divided into different zones, each with its own specific needs. The MD Codes™ method categorizes these areas using dedicated codes.
• Identifying problems and needs:
  Before injection, the doctor must carefully assess each individual’s concerns and needs, such as loss of cheek volume, deep lines, and wrinkles.

2. Choosing the Right Filler

• Type of filler:
  The choice of filler depends on the patient’s needs and the area being treated. For example, hyaluronic acid fillers are commonly used to restore volume and hydrate the skin.
• Amount of filler:
  The required volume of filler must also be determined precisely to achieve a natural and well-balanced result.

3. Learning Injection Techniques

• Injection techniques:
  Filler injection with the MD Codes™ method requires mastery of various techniques. For example, in deeper areas such as the cheeks, filler is injected into deeper layers of the tissue, while in more superficial areas, such as the lips or around the eyes, injections are performed in more superficial layers.
• Cannula vs. needle:
  The use of a cannula or a needle depends on the area and the type of filler. Cannulas are often used for larger areas and can help reduce the risk of bruising.

4. Pre-injection Considerations

• Consultation with the patient:
  The physician should discuss the patient’s goals and expectations and explain the potential risks and side effects.
• Preparing the treatment area:
  The patient’s skin must be thoroughly cleansed and disinfected to minimize the risk of infection.

5. Injection Steps

• Injecting into coded areas:
  Injections are performed in different facial areas according to the predefined MD Codes™. For example, the code Ck1 may be used for injection in the cheek area.
• Adjusting the injected volume:
  The physician must carefully control the volume of filler injected to achieve a natural and harmonious result that matches the patient’s facial features.

6. Post-injection Care

• Immediate aftercare:
  The patient should follow the doctor’s instructions regarding post-treatment care, such as applying cold compresses and avoiding pressure on the injected area.
• Follow-up and evaluation of results:
  In follow-up sessions, the physician should evaluate the outcome of the injections and, if necessary, make further adjustments.

7. Practice and Hands-On Workshops

• Attending training workshops:
  To master MD Codes™ techniques, participating in hands-on workshops under the supervision of experienced instructors is highly beneficial.
• Practicing on real models:
  Repeated practice on human models helps improve accuracy and skill in injection.

The MD Codes™ method is a comprehensive and scientific system for filler injection, developed to improve outcomes and reduce complications. This approach requires continuous training and practice so that physicians can achieve the best possible results for their patients.

Advantages of Facial Contouring with the MD Codes™ Method

• High precision and natural results:
  Because the injection points are precisely defined, this method allows for more natural and harmonious results that respect the individual’s facial structure.
• Safety and minimal side effects:
  The use of hyaluronic acid fillers, which are naturally occurring and resorbable by the body, generally leads to fewer side effects compared to many other methods.
• Simultaneous rejuvenation and contouring:
  In addition to skin rejuvenation and wrinkle reduction, this method allows for facial reshaping and contour improvement without the need for surgery.
• Long-lasting results:
  Thanks to the precision of injection and careful selection of points, the results of this method are often longer-lasting than many other comparable techniques.
• No need for a long downtime:
  This method does not usually require a long recovery period, and the patient can quickly return to daily activities.
• Customizable and adaptable to individual needs:
  MD Codes™ enables physicians to tailor a treatment plan very precisely to each individual’s needs and aesthetic goals.

These advantages have made MD Codes™ a popular choice for people who are looking to improve the appearance of their face.

Disadvantages of Facial Contouring with the MD Codes™ Method

Despite its significant benefits, facial contouring with the MD Codes™ method also has some drawbacks that individuals should consider before making a decision. Some of these include:

• High cost:
  This method is often expensive due to the use of high-quality fillers and the need for advanced expertise in injection. The cost may be considerable for some patients.
• Temporary results:
  Hyaluronic acid fillers typically last between 6 to 18 months, after which repeat treatments are required. To maintain results, patients must undergo injections periodically.
• Risk of side effects:
  Although the rate of side effects is relatively low with this method, issues such as bruising, swelling, asymmetry or, in rare cases, allergic reactions and infections can still occur.
• Need for experience and expertise:
  Successful implementation of MD Codes™ requires a high level of experience and skill. If performed by an inexperienced practitioner, the results may look unnatural or unsatisfactory.
• Limitations for major changes:
  This method is most suitable for subtle to moderate corrections. For more drastic or structural changes, surgical procedures or combination treatments may be required.
• Technique-dependent results:
  The quality of the outcome is highly dependent on the physician’s ability and precision in choosing injection points and filler volume. Lack of sufficient accuracy can lead to uneven or unnatural results.

Because of these drawbacks, it is very important to carefully consider your options and consult with a qualified specialist before undergoing facial contouring with the MD Codes™ method, in order to make a fully informed decision.